DIGITAL VOIP ROUTER
3
1. Connect the VOE241 to your PC
First, the VOE241 must be connected to the mains power supply with the power
cable. Wait until the
Power
LED stops blinking and stays lit constantly. Now the
VOE241 is ready.
The VOE241 is equipped with Auto-MDX Ethernet ports, so you can use
straight-through cables for host or hub/switch connections (see Figure 1).
Figure 1.
Connecting the VOE241 to your laptop PC
The VOE241 comes with a built-in DHCP server to simplify configuration.
Therefore, to automatically configure the PC for IP connectivity to the VOE241,
the laptop PC must be configured for DHCP. The VOE241 will provide the PC
with an IP address. You can check the connection to the VOE241 by executing
the ping command from the PC command window as follows:
ping 192.168.1.1
