Black Box ServSwitch KV1081A User Manual Download Page 5



























®

Power switch

IP network/

Internet

LOC REM VNC 100 LNK PWR

BLACK BOX

CX Uno IP

BLACK BOX

724-746-5500

®

®

SAM

SAM

SAM

SAM

SAM

SAM

Introduction

Thank you for choosing the ServSwitch CX Uno IP from 
Black Box. This compact unit has been created to allow 
a single operator to take full control of many computer 
systems. 
Like the other models within the highly successful 
ServSwitch CX Uno family, this unit takes full advantage 
of category 5, 5e or 6 structured cabling to provide 
flexible installation and configuration. Every connected 
computer is linked by up to ten metres of standard 
CATx cable and one of five types of SAM (Server Access 
Module) according to the port arrangements on each 
computer. 

The ServSwitch CX Uno IP is available in two sizes, 
supporting eight or sixteen computers respectively. 
These numbers can be increased at any time thanks 
to the ability to connect ServSwitch CX Uno IP units in 
cascade to provide a much larger network of controlled 
computers. Both models provide full enterprise level 
security to restrict access to authorized personnel.  
Optional power switch control allows you to remotely 
perform a hard reset on any host system, no matter 
how badly it has locked up. 

In addition to the local user console, the ServSwitch 
CX Uno IP units provide true global control for the 
multiple host systems. Up to four global users can 
share access to a computer from anywhere via an IP 
network/internet connection using a Real VNC client 
application. Each ServSwitch CX Uno IP is even able to 
provide the VNC application to each global user, either 
as a standalone application or as a Java applet within a 
standard internet browser. 

Many computers

ServSwitch CX Uno IP units can directly support either 8 or 16 
computer systems. Multiple ServSwitch CX Uno units can also be 
cascaded onto the original unit to support a maximum of 256 
computers.  
Each system is linked using a Server Access Module (SAM) and 
category 5, 5e or 6 cabling to a maximum distance of 10m  
(32 ft) from the ServSwitch CX Uno IP unit.  

Optional power control

You have the opportunity to 
attach one or more power 
switches. These control the 
supply to the system(s) and 
allow a remote user to hard 
reset any system that has 
suffered a failure. 

Local user

One user can 
be connected 
directly to the 
ServSwitch CX 
Uno IP.     

Global users

The IP models can support up to 
four global users at any one time. 

SAM formats

The SAMs are available in 
different formats to support all 
common types of systems, which 
can easily be mixed within a 
multi-format configuration. 

Represents Video, 
PS/2 keyboard and 
mouse connections

Represents Video, 
USB keyboard and 
mouse connections

}

IP network/Internet

The IP port allows direct 
connection to an Ethernet-based 
local network and from there 
onto the wider Internet.
Alternatively, the robust 
ServSwitch CX Uno IP security 
system will allow direct 
connection to the outside world.  

}

Summary of Contents for ServSwitch KV1081A
































































































Reviews: