12
SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM
2.2 Key Features
• Digital transmission of video, keyboard, mouse, and optional audio
information on only two fibers over distances up to 400 m (1310 ft.) of
multimode cable or 10 km (6.2 mi.) of single-mode cable.
• Supports an optional local monitor, keyboard, and mouse user station that
contends with the remote station for CPU control.
• Supports several of the most common VGA-compatible video standards (DOS
mode, VGA, XGA, SVGA, or SXGA) at resolutions up to 1280 x 1024 or output
refresh rates up to 75 Hz.
• Automatic adjustment of all transmission and image parameters—you don’t
have to configure it.
• All cables you would normally need except for the fiber cable are included.
2.3 The Complete Package
At the time of this writing, your Extender package should consist of:
• The Extender’s Local Unit.
• The Extender’s Remote Unit.
• (2) Power supplies with 6-ft. (1.8-m) nondetachable output cords, one for each
Unit.
• (2) Input cords, one for each power supply; length might vary depending on
region and source, but is normally 6 ft. (1.8 m).
• (1) 6-ft. (1.8-m) VGA-extension cable with HD15 male connectors at both
ends.
• (2) 6.6-ft. (2-m) PS/2
®
extension cables with 6-pin mini-DIN male connectors
at both ends.
• (1) 6.6-ft. (2-m) audio-extension cable with 3.5-mm stereo audio plugs at both
ends.
• This manual.
However, the package contents are subject to change without notice. If the
package has been damaged, contact both Black Box and the shipping carrier.
