ServSwitch Wizard DVI/USB SRX
724-746-5500 | blackbox.com
Page 10
3.2 Connections
Installation of the ServSwitch Wizard DVI/USB SRX modules is straightforward and requires minimal configuration in most cases.
• Connections at the local module
• Connections at the remote module
Note: After all connections are made, power up the monitor connected to the remote module, then power up the remote mod-
ule and finally switch on the computer connected to the local module.
3.2.1 Connections at the local module
3.2.1.1 Video connections
1 Use the supplied DVI/D link cable to connect the DVI input socket of the local module to the digital video output socket of the
computer as shown in Figure 3-3:
LIN
K
TO
REM
OTE
ON
iz
ar
d
D
V
I/
U
SB
SR
X
K
V
M
E
X
T
E
N
D
E
R
Figure 3-3. Attaching the DVI/D video link cable
[Dual-variant only] Optionally attach a second video
input from the computer system using the supplied
DVI/D link cable.
Figure 3-4. Attaching two DVI/D video link cables to the dual-variant local module
LIN
K
TO
REM
OTE
ON
tc
h
W
iz
ar
d
D
V
I/
U
SB
SR
X
™
K
B
O
X
K
V
M
E
X
T
E
N
D
E
R
A
B
To secondary video
output port
To primary video
output port
