24
SERVSWITCH™ BRAND CAT5 BROADCAST VIDEO SYSTEM
We recommend that you avoid installing more than two
“layers” of Hubs or more than one “layer” of Dual
Remote Modules. That is, it’s OK to run from your first
Hub to as many as eight Dual Remote Modules or
secondary Hubs, and from each of your secondary Hubs
to as many as eight Dual Remote Modules. (This
configuration can reach up to 128 monitors.) But don’t
run (a) from your secondary Hubs to a third set of
Hubs, (b) from one Dual Remote Module to a second
Dual Remote Module, or (c) from the “Signal Pass-
Thru” port on a Dual Remote Module to another Hub.
6. Plug the HD15 male connector of a video cable
from a local monitor or other video-destination
device into each Remote Module’s HD15 female
connector labeled with a monitor icon. If this
device doesn’t have an attached video cable, or if
its video cable doesn’t have an HD15 male
connector on the Module end, attach an adapter
or run an adapter cable between the Module and
the device or its video cable. See
Appendix B
for a
list of available video adapters.
Summary of Contents for ServSwitch ACL8500A
Page 38: ...NOTES...
Page 39: ...NOTES...