background image

51

LEGAL INFORMATION

DISCLAIMERS AND NOTICES

The manufacturer specifically disclaims the implied warranties for this product of
merchantability and fitness for a particular purpose. Some states and provinces do
not allow limitations on how long an implied warranty lasts, so the above limitation
or exclusion might not apply to you.

In no event shall the manufacturer or its authorized representatives be liable for

any lost profits or direct, indirect, special, incidental, or consequential damages,
whether based on contract, tort, or any other legal theory.

No part of this manual may be reproduced, copied, or translated without prior

written approval of the manufacturer or its authorized representatives.

The manufacturer and its authorized representatives reserve the right to revise

this publication from time to time without being obliged to notify any person or
organization of such revision. We have prepared this manual for use by customers
as a guide for the proper installation, operation, and maintenance of this
equipment. The illustrations, specifications, and other information contained in
this document are the property of the manufacturer and its authorized
representatives, and any unauthorized use or disclosure of this information is
prohibited.

The manufacturer and its authorized representatives make no warranty of any

kind with regard to this manual. We shall not be liable for errors contained herein
or for incidental consequential damages in connection with the furnishing,
performance, or use of this material.

Summary of Contents for SC120A-R2






















































Reviews: