Black Box RAS-PutIn, Installation And User Manual

Page: 68 / 93

56 CHAPTER 5. USAGE
ˆ
Type of external LDAP Server
With this option you set the type of the external LDAP server. This is necessary since
some server types require special handling. Additionally the default values for the LDAP
schema are set appropriately. You can choose between
Generic LDAP Server , Novell
Directory Service and Microsoft Active Directory . If you have neither Novell Directory
Service nor Microsoft Active Directory then choose Generic LDAP Server and edit the
LDAP schema used (see below).
ˆ
Name of login-name attribute
This is the name of the attribute containing the unique login name of a user. To use the
default leave this field empty. The default depends on the selected LDAP server type.
ˆ
Name of user-entry objectclass
This is the objectclass that identifies a user in the LDAP directory. To use the default
leave this field empty. The default depends on the selected LDAP server type.
ˆ
User search subfilter
Here you can refine the search for users that should be known to the RAS-PutIn.
ˆ
Active Directory Domain
This option represents the active directory domain that is configured in the Microsoft
Active Directory server. This option is only valid if you have choosen
Microsoft Active
Directory as the LDAP server type.
5.5.10 Security Settings
Figure 5.29 shows the panel for security related SSL, Telnet and IP address settings. Each of
those categories will be explained in the following subsections.
Figure 5.29: Security settings