Black Box RAS-PutIn, Installation And User Manual

Page: 58 / 93

46 CHAPTER 5. USAGE
The SNMP settings panel as shown in Figure 5.21 , described below, allows you to change SNMP
related parameters.
Figure 5.21: SNMP settings
ˆ
Enable SNMP Agent
If this option is checked, RAS-PutIn will answer to SNMP requests. Hint: If a community
is left blank, you cannot perform the according request. E.g. if you want to disable the
possibility to reset RAS-PutIn via SNMP then don’t set a write community.
ˆ
Read Community
This is the SNMP community, which allows you to retrieve information via SNMP.
ˆ
Write Community
This community allows you to set options and to reset RAS-PutIn or the host via SNMP,
i.e. all that effects the host or RAS-PutIn.
ˆ
System Location
Enter a description of the physical location of the host. The description will be used in
reply to the SNMP request ”sysLocation.0”.
ˆ
System Contact
Enter a contact person for the host. The value will be used in reply to the SNMP request
”sysContact.0”.
ˆ
Enable SNMP Authentication Traps
If this option is checked, an SNMP trap will be sent in case somebody has tried to access
RAS-PutIn via SNMP using a wrong SNMP community.
ˆ
Enable RAS-PutIn Authentication Traps
If this options is checked, an SNMP trap will be sent in case somebody has tried to login via