POWER SWITCH PSE508MA & PSE508SA
12
NETWORK PARAMETERS SETTINGS MENU
Command /NP
This Menu is used to configure all network parameters (IP Address, Subnet Mask, Gateway and
Port) and to permit or prevent the configuration over a local area network using the special Power
Switch Finder program.
NETWORK PARAMETERS SETTINGS
MAC Address 00.01.9A.F1.00.0F
1. IP Address 192.168.100.100
2. Subnet Mask 255.255.255.0
3. Gateway 0.0.0.0
4. Port 80
5. Finder Activated
Enter Selection or <ESC> to exit
>
Command 1
NETWORK PARAMETERS SETTINGS
IP Address is: 192.168.100.100
Enter IP Address or <ESC> to exit
You must restart the device (Command /RS) to valid the new parameters
>
Command 2
NETWORK PARAMETERS SETTINGS
Subnet Mask is: 255.255.255.0
Enter subnet mask or <ESC> to exit
You must restart the device (Command /RS) to valid the new parameters
>
Command 3
NETWORK PARAMETERS SETTINGS
Gateway is: 0.0.0.0
Enter gateway address or <ESC> to exit
You must restart the device (Command /RS) to valid the new parameters
>
Command 4
NETWORK PARAMETERS SETTINGS
Port is: 80
Enter port or <ESC> to exit
You must restart the device (Command /RS) to valid the new parameters
>
Command 5
NETWORK PARAMETERS SETTINGS
Finder is: Activated
1. Activate
2. Deactivate
Enter Selection or <ESC> to exit
You must restart the device (Command /RS) to valid the new parameters
>
