22
RACKMOUNT REMOTE POWER MANAGER USER’S MANUAL
Figure 4-4. General Parameters menu—text interface.
The General Parameters menus allow you to define the following parameters.
• System password: The power manager will display a password prompt when
you attempt to access command mode. When the system password is entered
at logon, the system mode will be active, allowing access to both switching
functions and configuration menus. (The system password must be 4 to 16
characters, and the default value is undefined.)
NOTES
• If the system password is not defined, then the power manager will
always start up in system mode, and configuration functions will then
be available to anyone who accesses command mode.
• The system password cannot begin with a forward slash (
/
) or
backslash (
\
) character.
• The system password cannot include non-printable characters,
spaces, asterisks (
*
), or quotation marks.
• User name: The user name allows you to set up an additional layer of security
for Web access to command mode by requiring that users correctly enter both
a name and a password.
GENERAL PARAMETERS:
1. System Password:
(undefined)
2. User Name:
(undefined)
3. Site ID:
(undefined)
4. Command Echo:
On
5. Inactivity Timeout:
2 Mins
6. Command Confirmation:
On
7. Automated Mode:
Off
8. Manual Switch Button:
On
9. Command Prompt:
RPM
A. Default Parameters
Enter Selection,
Press <ESC> to Exit…
Summary of Contents for PS580A
Page 3: ......
