16
SERIAL
↔
PARALLEL CONVERTER (38.4 kbps)
5. Operation
Once your Converter is properly configured and
installed, it should operate transparently—as if it were a
standard cable connection. Operating power is derived
from the RS-232 data and control signals; there is no
ON/OFF switch.
The Converter features an easy-to-read status LED that
glows red to indicate the condition of the transmission
line. Figure 3-1 at the beginning of
Chapter 3
shows the
location of the LED. Table 5-2 (on the next page)
describes the LED’s various functions.
Table 5-1. Key for LED codes.
Key:
•
Blink
_
Short pause
___
Long pause
Summary of Contents for PI080A-R2
Page 3: ......