Black Box NL600, User Manual

Page: 13 / 48

3.2.1 Network
This function is mainly used to set the network of the device ,when using static
state , such as the subnet mask ,route , DNS must in accord with current
network.
Network test : Manually used to test if the device and target host computer
are connected .
Input IP address of target host computer into :Destination” ,test number of
times into “Number of times “ ,then click “Test” , test result page will display
information of network test ,MAC address of the Device will be displayed at the
left bottom.
If the test page don't have rection or slow in reacting , please check if the
network cable has been plugged well , columns of “Destination ” and “ Number
of times ”have been input completely and if the target host computer is in
starting state .