3
• Cables to run from the control port to a distant terminal or PC,
from the DDS port to the WAN jack, or from the main-link ports
to other devices
• Rackmount Kit (LRRACK)
• AC-power and data-line surge protectors.
Additional Equipment You Might Need
• Frame Relay Access Device Switch-3 A/S, 3-Port
• (1) power cord
• (1) RJ-45 to DB25 adapter for the control port
• V.35 and X.21 models only: (1) adapter cable for each V.35 or X.21
port (used to patch the switch‘s DB25 connector to a V.35-native
M/34 connector or an X.21-native DB15 connector)
• Users’ manual
• Packet Switching Guide
Package Includes
Ordering Information
ITEM
CODE
Frame Relay Access Device Switch-3 A/S
(Fradswitch-3 A/S), 3-Port
Port 1 (WAN) Ports 2 and 3 (Local)
RS-232
RS-232
MT760A-232/232
RS-232
V.35
MT760A-232/V35
V.35
V.35
MT760A-V35/V35
X.21
X.21
MT760A-X21/X21
RS-530
RS-530
MT760A-530/530
RS-530
RS-232
MT760A-530/232
DDS
RS-232
MT760A-DDS/232
DDS
V.35
MT760A-DDS/V35
You may also need…
RS-232 Cable
DB25 Male to DB9 Female................................EVMBMC
DB25 Male to DB25 Female .........................EDN25C-MF
DB25 Male to DB25 Male ...........................EDN25C-MM
RS-530 Cable, DB25 Male to DB25 Male .....EVN530-MM
V.35 Cable, M/34 Male to M/34 Male ............EYN450-MM
X.21 Cable, DB15 Male to DB15 Male .........EGM16E-MM
Stranded Category 5 Patch Cable (for DDS) .....EVMSL05
Rackmount Kit.............................................................LRRACK
Use pairs of Frame Relay Access Device Switch-3 A/S units to run IP
over X.25 and extend your intranet from HQ to all of your corporate
sites—or your extranet to all your vendors and major accounts—
continent-wide.
Typical Application
