25
MULTIPORT CSU/DSU
Software Configuration
Select Software Configuration from the Main Menu to display the current settings
of the software switches. The software switches control the same parameters
described in
Section 3.1, Configuring the Hardware Switches
. See
Section 3.1
to
review the hardware switch definitions.
Figure 3-22. Software Configuration Screen.
To modify any of the parameters listed above:
1. Type the highlighted letter that corresponds to a menu selection.
2. Press
[Space Bar]
until the desired value is highlighted.
3. Press
<Enter/CR>
to select the desired value.
Software Configuration
Line Rate
56.0 kbps
Rate Adapter/DTE Rate
19.2 kbps
Transmit Clock Source
Network
Data Format
Asynchronous
Character Length
11 bits
Extended Signaling Rate
Extended
RTS/CTS Delay
Extended
Forced RTS
Off
Anti-Stream Timer
On
DSR Loop Status
On
Circuit Assurance
On
Response to Remote Loop
Off
DTE Loop Request
Off
Control Port Speed
19.2 kbps
Select=[Highlighted Letter]
Scroll Options=[Space Bar]
Exit = [ESC]
d
a
b
c
d
e
f
g
h
i
j
k
l
m
n
