9
CHAPTER 3: Installation
3. Installation
To install the SHM-NPR Plus, take these steps:
1. Separate the two halves of the unit’s plastic
cover by pressing the marked areas on the
sides of the cover. (Start at the cable end.)
2.
For a coax connection:
Connect the coax cable’s shielding and center
wire to the pair of connectors marked LINE
on the SHM-NPR Plus’s screw-terminal block.
(The SHM-NPR Plus isn’t polarity-sensitive:
It doesn’t matter which of the LINE terminals
you attach shield to and which one you attach
the center wire to.) Don’t attach anything to
the SHM-NPR Plus’s GND terminal.
For a twisted-pair connection:
Connect the twisted-pair cable’s two wires
to the pair of connectors marked LINE
on the SHM-NPR Plus’s screw-terminal block.
(The SHM-NPR Plus isn’t polarity-sensitive:
It doesn’t matter which of the LINE terminals
you attach which wire to.) If the twisted-pair
cable is shielded, attach the shield to the
SHM-NPR Plus’s GND terminal.
