User Manual
4.4.2 Ethernet Setup submenu
Configuration Management->EtherNet Setup
1.[Speed]:Auto
2.[Duplex Mode]:Auto
3.[Disable Mac Filter]:No
4.IP Address>>192.168.5.105
5.Subnet Mask>>255.255.255.0
6.Gateway Address>>192.168.5.1
8.NMS IP Address>>192.168.5.32
9.Read Community>>
10.Write Community>>
11.Trap Community>>
12.[Enable TFTP Server]:No
13.[DSL Reboot]:No
14.[Time before Reboot]:30min
Select item number or ESC to Upper level menu>>
•
In the Speed menu, you can setup the Ethernet speed to the following states:
10M, 100M or Auto
•
In the Duplex Mode menu you can setup the Ethernet ports to the following states:
Half, Full or Auto
•
In the IP Address-, Subnet Mask- and Gateway Address menu you, can setup the desired
IP settings
•
In the NMS IP Address menu you can setup the IP receiver address for the SNMP traps
(the Network Manager).
•
In the Read / Write / Trap Community menu you can setup the desired SNMP community
address names (text).
•
In the “Enable TFTP Server” menu you can enable / disable the software download feature
•
In the “DSL Reboot” menu you can enable / disable the DSL line restart feature. This
feature will be activated in case of lacking data streams between two modems.
•
In the “Time before Reboot” menu you can setup the wait time before the units reboots in
case of lacking data streams.
Version: 1.9
Page. 20 of 29
