59
CHAPTER 4: AT Commands, S-Registers, and Result Codes
Terse
Verbose
Description
10*
CONNECT 2400
Connected at 2400 bps
11*
CONNECT 4800
Connected at 4800 bps
12*
CONNECT 9600
Connected at 9600 bps
13*
CONNECT 14400
Connected at 14,400 bps
14*
CONNECT 19200
Connected at 19,200 bps
24*
CONNECT 7200
Connected at 7200 bps
25*
CONNECT 12000
Connected at 12,000 bps
26*
CONNECT 16800
Connected at 16,800 bps
40*
CONNECT 300
Connected at 300 bps
55*
CONNECT 21600
Connected at 21,600 bps
56*
CONNECT 24000
Connected at 24,000 bps
57*
CONNECT 26400
Connected at 26,400 bps
58*
CONNECT 28800
Connected at 28,800 bps
59*
CONNECT 31200
Connected at 31,200 bps
60*
CONNECT 33600
Connected at 33,600 bps
70*
CONNECT 32000
Connected at 32,000 bps, 56 K rate
71*
CONNECT 34000
Connected at 34,000 bps, 56 K rate
72*
CONNECT 36000
Connected at 36,000 bps, 56 K rate
73*
CONNECT 38000
Connected at 38,000 bps, 56 K rate
74*
CONNECT 40000
Connected at 40,000 bps, 56 K rate
75*
CONNECT 42000
Connected at 42,000 bps, 56 K rate
76*
CONNECT 44000
Connected at 44,000 bps, 56 K rate
77*
CONNECT 46000
Connected at 46,000 bps, 56 K rate
78*
CONNECT 48000
Connected at 48,000 bps, 56 K rate
79*
CONNECT 50000
Connected at 50,000 bps, 56 K rate
80*
CONNECT 52000
Connected at 52,000 bps, 56 K rate
81*
CONNECT 54000
Connected at 54,000 bps, 56 K rate
82*
CONNECT 56000
Connected at 56,000 bps, 56 K rate
*EC is added to these result codes when the extended result codes configuration
option is enabled. EC is replaced by one of the following codes, depending on the
type of error control connection:
V42bis
—V.42 error control (LAP-M) and V.42bis data compression.
V42
—V.42 error control (LAP-M) only.
MNP5
—MNP 4 error control and MNP 5 data compression.
MNP4
—MNP 4 error control only.
NoEC
—No error control protocol.
