18
SPEEDSTER 288 INTERNAL FAX/MODEM
6. Once the modem is in place, screw the bracket at the back of the modem
firmly to the computer’s rear panel. This ensures that the modem board
is firmly in place.
7. Replace the computer cover and all its screws. Reattach all cables and
power cords.
8. If you currently have a phone plugged into the wall jack, disconnect it.
Plug one end of the phone cable that came with the modem into the
TELCO jack at the rear of the modem. Plug the other end of the cable
into the wall jack.
3.3 Configuring with Windows 95
After removing all the connectors from the modem’s jumpers and installing
the modem, turn your computer on. Then follow these steps:
1. In the
New Hardware Found
dialog box, select the
Select from a list of
alternate drivers
option. Then click on the
OK
button.
2. In the
Select Hardware Type
dialog box, find and click on the
Modem
selection. Then click on the
OK
button.
3. In the
Install New Modem
dialog box, find and click on the
U.S. Robotics
selection in the
Manufacturers
list.
4. Next, find and click on the 28.8 Courier modem listed in the
Models
list.
The settings for this selection will work well for your modem. Then click
on the
OK
button.
Windows 95 has now been configured to work with your new modem. Now
you’re ready to install your software.
