17
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: OVERVIEW
MCX-S9-ENC or MCX-S9D-ENC Series Unit Back Panel
Figure 2-2 shows the back panel of the MCX-S9-ENC or MCX-S9D-ENC series unit. Table 2-3 describes its components.
1 2 3 4 5 6 7 8 9 10
FIGURE 2-2. BACK PANEL (MCX-S9-ENC OR MCX-S9D-ENC SERIES UNIT)
TABLE 2-3. BACK- PANEL (MCX-S9-ENC OR MCX-S9D-ENC SERIES UNIT) COMPONENTS
NUMBER IN FIGURE 2-2
COMPONENT
DESCRIPTION
1
(1) 12-VDC power
connector
Connect to the power adapter provided.
2
(1) DisplayPort in
connector
Connect this port to a DisplayPort source device.
3
(1) HDMI in
connector
Connect this port to an HDMI source device.
4
(1) Optical OUT port
Connect this 10GbE fiber port to a 10GbE Ethernet switch for IP stream output using a 10GbE
SFP+ fiber optic transceiver.
5
(1) 10GbE OUT port
Connect this 10GbE copper port to a 10GbE Ethernet switch for IP stream output.
6
(1) RS-232 port
Connect this port to an RS-232 device such as a computer for bidirectional serial
communication with an RS-232 device connected to another MCX-S9 unit on the network.
7
IR OUT
Connect to an IR transmitter for IR communication with an IR receiver in another MCX-S9
series unit on the network.
8
IR IN
Connect to an IR receiver for IR communication with an IR transmitter in another MCX-S9
series unit on the network.
9
(1) RJ-45 LAN port
10/100/1000BASE-T: Connect this port to a switch, a router or a computer for signal routing,
device management, and device upgrading via control software PC configurator.
10
Audio IN
Connect to an audio input device, such as a computer or a mobile phone, for audio input.
