13
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: OVERVIEW
2.6.2 FRONT PANEL
MCX-S7-ENC Series Units
Figure 2-2 shows the front panel of the MCX-S7-ENC series units. Table 2-3 describes its components.
DC 12V
HDMI IN
RS232
12V TX RX G
10GbE
IR IN
IR OUT
LAN
AUDIO IN
DC 12V
HDMI OUT
RS232
12V TX RX G
OPTICAL OUT
IR IN
IR OUT
LAN
AUDIO IN
1 2 3 A 4 5 6 7
1 2 3 B 4 5 6 7
FIGURE 2-2. FRONT PANEL (MCX-S7-ENC SERIES UNITS)
TABLE 2-3. FRONT PANEL (MCX-S7-ENC SERIES UNITS) COMPONENTS
NUMBER IN FIGURE 2-2
COMPONENT
DESCRIPTION
1
12-VDC power
connector
Connect to the power adapter provided.
2
HDMI IN
Connect to an HDMI video source.
3
RS-232
Connect to an RS-232 device, such as a PC, for bi-directional serial communication with an
RS-232 device connected to another MCX-S7 series unit on the network.
A
10GbE OUT
Connect this 10GbE copper port to a 10GbE Ethernet switch for IP stream output.
NOTE: This port exists on the MCX-S7-ENC only.
B
Optical OUT
Connect this 10GbE fiber port to a 10GbE Ethernet switch for IP stream output using a 10GbE
SFP+ fiber optic transceiver.
NOTE: This port exists on the MCX-S7-FO-ENC only.
4
IR IN
Connect to an IR receiver for IR communication with an IR transmitter in another MCX-S7
series unit on the network.
5
IR OUT
Connect to an IR transmitter for IR communication with an IR receiver in another MCX-S7
series unit on the network.
6
LAN
10/100/1000 BASE-T: Connect this port to a switch, a router or a computer for signal routing,
device management, and device upgrading via control software PC configurator.
7
Audio IN
Connect to an audio input device, such as a computer or a mobile phone, for audio input.
