5
CHAPTER 3: Installation
3. Installation
Follow these steps to install the Async Fiber Optic
Modem:
1. See
Table 3-1
for the factory setting of the
Async Fiber Optic Modem. If the factory
settings are correct for your application,
skip to step 5. If the factory settings need
to be changed, go to step 2.
2. Remove the cover of the Async Fiber Optic
Modem by pressing in on the four tabs located
on each side of the unit and lifting the top half
of the cover from the bottom half.
Summary of Contents for MAY 1994
Page 10: ...NOTES ...
