50
BROADBAND ROUTER
Parameters
Default
Description
DHCP Server
Enabled
You can enable or disable the DHCP server.
By enabling the DHCP server, the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled, then
you’ll have to manually set your LAN client’s
IP addresses. Make sure the LAN client is in
the same subnet as the Broadband Router if
you want the router to be your LAN client’s
default gateway.
IP Address Pool
You can select a particular IP address range
for your DHCP server to issue IP addresses
to your LAN Clients.
NOTE
By default the IP range is from Start IP 192.168.2.100 to End IP
192.168.2.199. If you want your PC to have a static/fixed IP address, then
you’ll have to choose an IP address outside this IP address pool.
Domain Name
You can specify a domain name for your
LAN.
Lease Time
The DHCP, when enabled, will temporarily
give your LAN clients an IP address. In the
Lease Time setting, you can specify the time
period that the DHCP lends an IP address to
your LAN clients. The DHCP will change
your LAN client’s IP address when it
reaches this time threshold period.
Click
Apply
to save the configurations. You can now configure other advanced
sections or start using the router (with the advanced settings in place).
