724-746-5500 | blackbox.com
Page 11
Chapter 3: Installation
3. Installation
1. Connect (4) or (8) T1/E1 Trunk Lines to RJ-48 connectors on the back panel. Figure 3-1 shows the RJ-48 connector’s pin
assignments.
Pin 1 and Pin 2 (to output of demarc)
Pin 4 and Pin 5 (to input of demarc)
Figure 3-1. RJ-48 port’s pin assignment.
2. Connect CAT5 Ethernet cable to the RJ-45 connectors on the back panel.
3. Connect the 100-/240-VAC power to the AC socket.
4. Turn on the power switch. The LED indicators for E1/T1 connections and Ethernet should be ON.
5. Set the desired E1/T1 settings and Ethernet settings from the console port, and activate the configurations. Refer to Chapter 4
to see how to configure your 4-Port or 8-Port T1/E1 Ethernet Extender.
NOTE: The LR0304A-KIT or LR0308A-KIT extenders will execute self-test routines and automatically connect with each other. The
LAN LED indicators will start flashing to show Ethernet data activities.
Summary of Contents for LR0304A-KIT
Page 15: ...Page 15 NOTES ...
