14
IDSL AND SDSL NETWORK EXTENDERS
NOTE
The distance of the copper cable between the local Network Extender
and the remote Network Extender will affect the linking of the DSL
connection. If the distance is greater than a particular speed will
support, the units will not link up. Note that it may take anywhere
between 1 and 5 minutes for the DSL connection to link up, depending
on cable quality and distance.
4. Verify the DSL connection via the DSL LED on the front of the unit. A steadily
pulsing LED (once per second) indicates that the DSL connection is established
and operational. On the Network Extender Provider Units, the Lnk, Tx, and Rx
LEDs will not be lit once the DSL link is operational.
5. Plug in the local Ethernet connection and verify physical link by the Lnk LED
on the front of the unit. See the
Appendix
for Ethernet connection pinout
information.
Once the units have established both DSL and Ethernet link on both sides of the
connection, normal data communication will flow through the units, essentially
providing a very long Ethernet connection at DSL speeds.
3.2 Installation for LR0006A-AC/DC and LR0011A-AC/DC
1. Unpack the Network Extender and power cord (AC only). Attach the included
rubber feet for stackable installations or attach rackmount brackets and mount
the Network Extender in an equipment rack. When mounting unit in an
equipment rack, please adhere to the following:
a. Maximum recommended ambient temperature is 86°F (30°C). Internal
temperatures of rack should be considered for continued safe operation.
b. Do not block power-supply vents or otherwise restrict airflow when installing
unit in rack.
c. Mechanical loading of rack should be considered so that the rack remains
stable and unlikely to tip over.
d. Consideration of the overall loading of the branch circuit should be given
before installing any equipment in a rack environment.
e. Make sure that a reliable grounding path is maintained in the rack system.
This unit is intended for a grounded connection.
Summary of Contents for LR0005A-KIT
Page 2: ......
