10/100/Gigabit High Power PoE to 1000BASE-SX Media Converter
724-746-5500 l www.blackbox.com
Page 7
7. Installation
• Power installation
Power requirement: 100–240 VAC, 50–60Hz
Connect to an AC power source with an AC power cord.
•
Cabling Requirements
To help ensure a successful installation and keep the network performance good, make sure you use the required cable.
Cables with worse specifications will cause the LAN to work poorly.
---
Cabling Requirements for TP
The cable grade must be CAT5e that’s up to 328 feet (100 meters) long.
---
Cabling Requirements for FX
1000BASE-SX/LX networks only support full-duplex mode. The Switch-based Media Converter breaks up TP and Fiber
segments’ collision domain to extend the cabling distance.
Mode
Multi-Mode Fiber
62.5/125
μ
m
Multi-Mode Fiber
50/125
μ
m
Bandwidth
MHz-Km
Distance
Bandwidth
MHz-Km
Distance
160
220m
400
500m
1000SX (SC/LC)
850nm
200
275m
500
550m
1000LX (SC/LC)
1310nm/
1550nm
Single-Mode Fiber 9/125
μ
m
Single-Mode transceiver 1310nm: 10Km
Single-Mode transceiver 1550nm: 30/50Km
Note:
The 1310 nm and 1550 nm models must be installed in pairs, that is, install 1310 nm model at one end and 1550 nm
model at the other end.
The following lists the types of fiber you should use. Cables not listed here are available upon request.
Fiber (M-M): 50/125, 62.5/125, 100/140
μ
m (Supports distances up to 2 km)
Fiber (S-M):8.3/125, 8.7/125, 9/125, 10/125
μ
m (Supports distances up to 100 km)
8. Technical Specifications
Feature
Detailed Description
Power Requirement
100–240 VAC, 50–60Hz
Power Consumption
35 W
Operating Temperature
0
°
to 40
°
C
Storage Temperature
-20
°
to 70
°
C
Humidity
5% to 90%
Dimensions
158(W) x 40(H) x 133(D) mm
Weight
0.44kg
Installation
Wall mount, Desktop
Complies with
FCC Part 15 Class A and CE Mark