Chapter 3: Install the MultiPower Industrial Media Converters
LIC022A-R2
877-877-2269
|
blackbox.com
Page
9
3. Install
the
MultiPower
Industrial Media Converters
The MultiPower Industrial Media Converters install virtually anywhere as
standalone devices in locations with extremely limited space. Installation
options include:
•
Velcro
strips
•
DIN rail mounting with DIN Rail clips
•
PowerTray/18 for high density applications
3.1 DIN Rail Mounting
The MultiPower Industrial Media Converters ship
from the factory with DIN clips, allowing installation
on a DIN rail. Depending on the installation, the
MultiPower Industrial Media Converters can be
mounted parallel or perpendicular to the DIN rail.
Use the supplied screws to attach the DIN clips to
the MultiPower Industrial Media Converters, and
then snap the converter to the DIN rail.
To remove the converter from the DIN rail, use a
flat-head screwdriver in the slot to gently pry the
converter from the rail.
NOTE
The DIN clips are designed for use on a DIN-35 rail.
3.2 Cascading DC Power
When installing multiple MultiPower Industrial Media Converters on a DIN
rail, the end user can connect to one DC input source, and then cascade
from one DC block to the next, until reaching the maximum current available.
