7
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1.877.877.2269
BLACKBOX.COM
CHAPTER 4: INSTALLING THE CONVERTER
Follow these steps to install the PoE+ Media converter:
1. Turn off the power of the device/station in a network to which the Switch will be attached.
2. Ensure that there is no activity in the network.
3. Install the SFP module.
TABLE 4-1. COMPATIBLE SFPS
PART NUMBER
DESCRIPTION
LFP411
SFP - 1250-Mbps, Extended Diagnostics, 850-nm Multimode Fiber, 550-m, LC
LFP412
SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Multimode Fiber, 2-km, LC
LFP413
SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 10-km, LC
LFP414
SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 30-km, LC
LFP418
SFP - 1250-Mbps, Extended Diagnostics, 1550-nm Single-Mode Fiber, 80-km, LC
LFP420, LFP421
SFP - 1250-Mbps, Extended Diagnostics, 1550-nm TX, 1310-nm RX, Simplex, Single-Mode Fiber, 10-km, LC;
SFP - 1250-Mbps, Extended Diagnostics, 1310-nm TX, 1550-nm RX, Simplex Single-Mode Fiber, 10-km, LC
LFP416
SFP - 1250-Mbps, Extended Diagnostics, 10/100/1000BASE-T, SGMII Interface, RJ-45
NOTE: LFP420, LFP421 are single-strand fiber SFPs, so they must be used in pairs.
NOTE: Use the LFP416 for a copper interface.
NOTE: Only the built-in copper interface will do PoE.
4. Attach a fiber cable from the Switch to the fiber network.
5. Attach a CAT5/5e/6 UTP cable from the 10/100/1000BASE-T network to the RJ-45 port on the switch.
6. Connect the 48-VDC power adapter to the switch and verify that the Power LED lights up.
7. Turn on the power of the device/station, the TX Link and FX Link LEDs should light when all cables are attached.
