17
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: WEB MANAGEMENT
5.2.2 CONFIGURATION — PORTS
FIGURE 5-4. PORT CONFIGURATION SCREEN
Enable Jumbo Frames: This switch provides more efficient throughput for large sequential data transfers by supporting jumbo frames on
Gigabit Ethernet ports up to 9216 bytes. Compared to standard Ethernet frames that run only up to 1.5 KB, using jumbo frames significantly
reduces the per-packet overhead required to process protocol encapsulation fields.
Power Saving Mode: Adjusts the power provided to ports based on the length of the cable used to connect to other devices. Only sufficient
power is used to maintain connection requirements.
Mode: You can manually set the port speed, such as Auto, 10 half, 10 Full, 100 Half, 100 Full, 1000 Full or Disabled. Press the Apply button to
complete the configuration procedure.
Flow Control: You can manually enable or disable the Flow Control feature. Click the checkbox of the specific ports to enable and press the
Apply button to complete the configuration procedure.
Drop frames after excessive collisions: If enabled, the switch will drop frames if excessive collisions happen.
Enable 802.3az EEE mode: EEE (Energy-Efficient Ethernet) is a power-saving option that reduces the power usage when there is low or no
traffic use by powering down circuits when there is no traffic. You can enable this function to save power.
Buttons
Apply: Apply and save all the settings you’ve made on this page.
Refresh: Refresh the page.
