Page 50
724-746-5500 | blackbox.com
Chapter 5: Maintenance
5. Maintenance
5.1 Warm Restart
Press the “Yes” button to restart the switch. The reset will be complete when the
power lights stop blinking.
Figure 5-1. Warm restart prompt.
5.2 Factory Default
Forces the switch to restore the original factory settings. To reset the switch, select
“Reset to Factory Defaults” from the drop-down list and click “Apply.” The LAN IP
Address, Subnet Mask, and Gateway IP Address will be reset to their factory
defaults.
Figure 5-2. Software upload button.
5.3 Software Upload
Select “Upgrade Firmware” from the Tools drop-down list then click on the
“Browse” button to select the firmware file. Click the “Apply” button to upgrade
the selected switch firmware file. You can download firmware files for the switch
from blackbox.com.
Figure 5-3. Software upload screen.
