8-Port Value-Line Console Server Quick Start Guide
Figure 3. System: Services screen.
Note: The LES1508-A Value-Line Console Server comes with a second
network port (
ETH2
). This network is inactive by default; however it can be
set up to provide network failover/out-of-band access, or to provide a local
Management LAN.
Note: Use the Forwarding & Networking menu on System: Firewall to permit
remote IP access to devices on Network or Management LAN.
Step 4: Configure serial and network devices.
Select “Serial & Network: Serial Port,” which will display the label, mode,
and protocol options currently set for the serial port. By default, all the
serial ports, except Port 1, are set to console server mode (see the user‘s
manual for other modes).
Figure 3. Serial & Network: Serial Port screen.
To configure a serial port, click “Edit.”
Configure the common settings (baud rate, parity, data bits, stop bits, and
flow control) to match those of the serial device being controlled.
724-746-5500 | blackbox.com
Page 5
