background image

BLACK BOX

®

Hardened Managed Ethernet Switches Quick Start Guide

 LEH1008A 

LEH1008A-2GSFP 

LEH1008A-2MMSC LEH1008A-2SFP 

LEH1008A-2MMST 

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com   •   E-mail: [email protected]

Customer 

Support 

Information

Available models

Part Number

Product Name

Description

LEH1000 Series

LEH1008A

8-Port 10/100 Mbps PoE Hardened Managed 
Ethernet Switch

8 ports, 10/100 PoE (802.af), DC power

LEH1008A-2GSFP

8-Port 10/100 Mbps PoE 2-Port GE SFP Hardened 
Managed Ethernet Switch

8 ports, 10/100 PoE (802.af),  2 ports GE SFP,  
DC power

LEH1008A-2MMSC

8-Port 10/100 Mbps PoE 2-Port 100-Mbps MMSC 
Hardened Managed Ethernet Switch

8 ports, 10/100 PoE (802.af), 2 ports 100BFX, SC, 
DC power

LEH1008A-2MMST

8-Port 10/100 Mbps PoE 2-Port 100-Mbps MMST 
Hardened Managed Ethernet Switch

8 ports, 10/100 PoE (802.af), 2 ports 100BFX, ST, 
DC power

LEH1008A-2SFP

8-Port 10/100 Mbps PoE 2-Port SFP 100-Mbps 
Hardened Managed Ethernet Switch

8 ports, 10/100 PoE (802.af), 2 ports 100BFX SFP, 
DC power

This quick start guide describes how to install and use the hardened Managed Ethernet Switch. Designed for rugged  
environments, Hardened Managed Ethernet Switches provide reliable switching in industrial areas constrained by space. 

Functional Description

• Supports IEEE 802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE).

• Includes redundant power inputs: 47 to 57 VDC terminal block and 47–57 VDC jack.

•  Power consumption: Device 15 W max. (without PoE); PoE power budget: 123.2 W max., PoE power output:  

Ports 1–8: IEEE 802.3af: Up to 15.4 W/port, 47–57 VDC.

• Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for traffic control equipment.

• Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environments.

•  Supports IEEE 802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation: 1000-Mbps full duplex; 10/100-Mbps full-/half-duplex; 

Auto MDI/MDIX.

• Supports Command Line Interface in RS-232 console.

• 100BASE-FX: Multimode SC or ST type; single-mode SC or ST type. 100BASE-

BX

: WDM single-mode SC type.

• 1000BASE-SX/LX: Multimode or single-mode SC type. 1000BASE-

BX

: WDM single-mode SC type.

• Supports 8192 MAC addresses. Provides 2M bits memory buffer.

• Alarms for power and port link failure by relay output.

• Supports DIN-rail or panel mounting installation.

• RS-232 console, Telnet, SNMP v1 & v2c & v3, RMON, Web Browser, and TFTP management.

Summary of Contents for LEH1008A









Reviews: