2
• Compact Single-Port Terminal Server
• (1) 4-ft. (1.2-m) DB9 female-to-RJ-45 cable for connecting a DTE to
perform management and configuration
• LE995A-R4, LE995AE-UK-R4, LE995AE-EU-R4 only:
External wallmount power supply unit
• User manual (includes CLI reference)
Compliance:
FCC Part 15, Class A;
CE; power supply on LE995A-R4
is UL
®
Listed
Protocols:
ARP: RFC 826;
DNS: RFCs 1034, 1035;
IP: RFC 791;
RARP: RFCs 903;
SLIP: RFC 1055;
UDP: RFC 768;
DHCP: RFCs 2131, 2132;
ICMP: RFC 792;
PPP: RFCs 1332, 1661, 1662;
RIP: RFC 1058;
TCP: RFC 793
Speed (Maximum):
RS-232: 115.2 kbps;
Ethernet: 10 Mbps
Processor:
Toshiba
®
68HC000
Internal Memory:
RAM: 64 KB with
2 KB NVRAM;
EPROM: 256 KB
Management:
SNMP/MIB-II: RFCs 1155, 1157,
1213; CLI
Connectors:
Network interface:
(1) RJ-45 10BASE-T (IEEE
802.3/Ethernet compliant);
Terminal interface: (1) RJ-45
RS-232C (accepts 4-, 6-, or
8-pin RJ-45 plugs)
Indicators:
(2) LEDs: Power and Link
Integrity
Temperature Tolerance:
Operating: 32 to 104°F
(0 to 40°C);
Storage: 14 to 158°F
(-10 to +70°C)
Humidity Tolerance:
Up to 95%,
noncondensing)
Power:
LE995A-R4: 120 VAC, 60 Hz,
external wallmount;
LE995AE-UK-R4, LE995AE-EU-R4:
230 VAC, 50 Hz, external
wallmount;
LE996A: No power supply
included; accepts any
2-position DC power strip
from -48 VDC to +48 VDC,
including 12 V, 24 V, and 48 V
Size:
1.2"H x 2.6"W x 4.9"D
(3 x 6.6 x 12.5 cm)
Weight:
0.4 lb. (0.2 kg)
Package Includes
Hub
Host Computer
LE995A-R4
LE995A-R4
LE995A-R4
Specifications
Ordering Information
ITEM
CODE
Compact Single-Port Terminal Server
120-VAC AC-Powered.......................................LE995A-R4
230-VAC AC-Powered U.K. ....................LE995AE-UK-R4
Europe ...............LE995AE-EU-R4
DC-Powered..............................................................LE996A
(NOTE: DC power supply is not included.)
You may also need…
Category 5 Solid-Conductor Cable, 4-Pair,
Straight-Pinned, PVC, ......................................EYN737MS
RS-232 Cable, 25-Conductor ...................................ECM25C
So you have three devices to link to
your 10BASE-T Ethernet network?
Then three Compact Single Port
Terminal Servers will do the job.
users can even share a modem
and dial out to the Internet or other
BBS services.
The latest version of the
terminal server has several
improvements. For instance, you
can now configure the device’s
IP address via PING. Just enter
the unit‘s Ethernet address into a
client host’s ARP table and, when
the client ”PINGs” that IP address,
the Compact Single-Port Terminal
Server automatically assigns itself
the IP address that it finds inside
the PING packet.
The updated Compact Single-
Port Terminal Server also makes
reconnecting to Telnet easier. If
you use the device to originate
a standard or raw-mode Telnet
session, the terminal server can be
set up to automatically re-establish
the session if it‘s lost or broken.
What’s more, you can now use
Telnet to access the device’s
command line interface (CLI).
Firmware enhancements also
allow you to set a TCP timeout,
where TCP socket (raw Telnet)
connections automatically shut
down if the terminal server doesn’t
experience packet activity for a
defined period of time.
Installation and configuration
are easy. The Compact Single-Port
Terminal Server is completely self-
contained, requiring no additional
software to be loaded into the unit
or onto a host. For configuring
and managing the terminal server
from connected data terminal
equipment (such as a PC), we
provide a 4-foot (1.2-m) DB9
female-to-RJ-45 serial terminal
cable.
To preserve your configuration
settings during power outages, the
system‘s parameters are stored in
non-volatile RAM.