29
CHAPTER 4: Software Setup and Operation
4.2.3 I
NSTALLING THE
D
RIVER IN
W
INDOWS
NT
To install the Modular Parallel Adapter’s NDIS 3 driver
for Microsoft Windows NT version 3.x or 4.0, take these
steps:
1. Start Windows NT.
2. Click on the “Main” program group.
3. Select “Network.”
4. Choose “Add adapter.”
5. Insert the Network Drivers diskette in your floppy
drive.
6. At the “A:\” prompt in the “Add adapter” window,
type “WINNT31” if you are running Windows NT
3.1, “WINNT35” if you are running Windows NT
3.5, or “WINNT40” if you are running Windows NT
4.0. Click on “OK.”
7. Select the “Ethernet Adapter,” then press “OK.”
8. Click on “Finish.”
Windows NT will update and copy the appropriate files
to your hard drive. To run this new driver, you’ll have
to reboot your PC.
