36
LDM-144LR
Figure 6-2. RM110A Card Cage.
NOTE
It is possible to combine AC and DC power supplies in the same cage.
6.4 Installation
6.4.1 E
LECTRICAL
I
NSTALLATION
Follow the jumper set-up procedures in
Section 3.4.5
. The rear panel is
shown in
Figure 6-3
.
6.4.2 M
ECHANICAL
I
NSTALLATION
After installing the RM110A in the 19" rack, the LDM-144LR cards should be
inserted into it. Once the cards have been inserted, the nut on the top and
bottom of each card should be tightened to ensure that it is fully inserted into
the edge connector, inside the rack.
ON
ON
Dual,
Redundant,
Hot-
Swappable
Power Supply
