12
16- AND 24-PORT STACK HUBS
• Install the Hub on a sturdy, level surface that can support its weight, or in an
EIA standard-size equipment rack. For information on rack installation, see
Section 3.2.2
.
When installing the Hub stack on a level surface, attach the rubber feet to the
bottom of each device. The rubber feet cushion the Hub and protect the Hub case
from scratches.
3.2.2 R
ACK
M
OUNTING
The Hub can be mounted in an EIA standard-size, 19-inch rack (48.3-cm), which
can be placed in a wiring closet with other equipment. Attach the mounting
brackets at the Hub’s front panel (one on each side), and secure them with the
provided screws.
Figure 3-3. Attaching the mounting brackets.
Then use screws provided with the equipment rack to mount each hub in the rack.
Figure 3-4. Installing the screws.
