724-746-5500 | blackbox.com
Page 32
Black Box G.SHDSL.bis EFM CPE
5.1.2 How to Disconnect
The remote console session ends under any of the following conditions:
• The user enters the command logout
• A timeout period of 5 minutes elapses since the user has entered a command to
the console.
• The DSL link drops.
The response upon logging out of the remote console session with the command
logout is Console: Remote console connection lost. The following is what is displayed
upon a user’s logging out of a remote console session after logging in.
> remote console
>
Console: Remote console connection established.
password: ******
> logout
Console: Remote console connection lost.
>
The timeout period is a fixed, non-configurable parameter of 5 minutes. If the remote
LB510A-R2 (far-end) has received no command within 5 minutes, it automatically ter-
minates the RCS. Once the RCS is terminated, the PC (far-end) can establish a local
console session if desired. However if the PC (near-end) wishes to re-establish a RCS,
it is able to do so whether or not the PC (far-end) is in an active local session, because
the RCS has priority over a local console session. If the PC (near-end) establishes an
RCS while the PC (far-end) is on a local session, the PC (far-end) is kicked off.
5.1.3 Differences in local and remote control session behavior
Since the remote console session communication occurs over the G.SHDSL link’s
EOC channel, some commands via the RCS have unusual effects.