Page 18
724-746-5500 | blackbox.com
Chapter 4: Operation
L-Ctrl + L-Ctrl + F5
The KVM switch beeps once or twice corresponding to ON or OFF respectively.
Force the audio signal to follow with the selected computer by pressing
the following hotkey:
L-Ctrl + L-Ctrl + A
USB-Port Rule
There are two options for setting the rule of USB 1 and USB 2 on the Console
side:
When set to “ON,” USB-Port selection follows computer selection.
When set to “OFF,” USB-Port selection stops following computer selection.
USB port setting for 2-Port model (KV9702A):
Press the hotkey below to turn ON/OFF both the USB 1 and USB 2 port Rule
L-Ctrl + L-Ctrl + F7
USB port setting for 4-Port model KV9704A:
USB 1: Pressing the hotkey below will turn ON/OFF the USB-Port Rule
L-Ctrl + L-Ctrl + F7
USB 2: Pressing the hotkey below will turn ON/OFF the USB-Port Rule
L-Ctrl + L-Ctrl + F8
Force the USB signal to follow the selected computer by pressing the following
hotkey (applicable for both 2-Port [KV9702A] and 4-Port [KV9704A]):
L-Ctrl + L-Ctrl + U
NOTE: Make sure that the USB device is unlinked (safely removed) before
switching to the next computer.
Alternative Hotkey Commands
In addition to the Left-Ctrl + Left-Ctrl hotkeys, there are two alternative hotkey
sequences available.
1. For the following operations, users may press Scroll-Lock twice instead
of pressing Left-Ctrl twice.
