CHAPTER 3: Installation
15
To select the audio signal from any of the connected computers’ four ports, press
the Function button in combination with the other push buttons as described
below.
1.
Press and hold the Function button. Either all the four green LEDs light to
indicate the audio port and the selected computer are the same (this is called
tracking mode) or just one green LED lights to indicate that the audio port is
different from the selected computer port (called non-tracking mode).
2.
While holding down the Function button, press push button #1, #2, #3, or #4
to select audio port 1, 2, 3, or 4, respectively.
or
Hold down the Function button and press push buttons #1 and #2 together to
enter tracking mode.
3.
Release the Function button to exit the setting.
Summary of Contents for KV9604A
Page 2: ......
