12
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: OPERATION
TABLE 4-1 (CONTINUED). OPERATION COMMANDS FOR HOTKEYS/FRONT-PANEL BUTTONS
COMMAND
HOTKEYS
1
FRONT-PANEL BUTTON
DESCRIPTION
Unbind PC and Hub Port
Control Switching
2
[Default]
Scr-Lock, Scr-Lock + “X”
—
Disable the binding of PC port and hub
port control switching
Bind PC and Audio and Mic
Switching
3
[Default]
Scr-Lock, Scr-Lock + “Q”
—
Enable the binding of PC port and
audio and mic switching. (Once this
feature is enabled, any PC and/or
audio and mic switching is bound
together) (factory default)
Unbind PC and Audio and
Mic Switching
3
[Default]
Scr-Lock, Scr-Lock + “W”
—
Disable the binding of PC port and
audio and mic
Previous PC port
2
(Jointly
select PC/ hub port control,
if binding is enabled)
Scr-Lock, Scr-Lock + “” (Arrow Up)
—
Select the previous connected PC port
(Jointly select PC/ hub port control, if
binding is enabled)
Next PC port
2
Scr-Lock, Scr-Lock + “” (Arrow Down)
—
Select the next connected PC port
(Jointly select PC/ hub port control, if
binding is enabled)
Previous PC port
Scr-Lock, Scr-Lock + ” ” (Backspace)
—
Toggle between the previous port and
current port
Beep Sound On/Off
Scr-Lock, Scr-Lock + “B”
—
Toggle on/off the beep sound
Define Hotkey Preceding
Scr-Lock, Scr-Lock + “H” + “y”
y=Scroll Lock, Caps Lock, ESC, F12,
Num Lock
Press and hold down last button
(Button 2/Button 4 ) till two beeps,
release the button, then press (y)
Select the hotkey preceding sequence
among 5 alternative keys
Autoscan
Scr-Lock, Scr-Lock + “S”
—
Autoscan through every connected
port for quick screen browsing of each
port (scan delay = 5 sec.)
Autoscan with
Programmable Delay
Scr-Lock, Scr-Lock + “H” + “z”
z = 1>10’, 2>20’,3>30’, 4>40’, 5>50’,
6>60’, 7>70’, 8>80’, 9>90’, 0>100’
—
Autoscan with a user-defined delay
time within a range of 10 to 100
seconds
Stop Auto Scan
Press any key on keyboard
Press any button
Terminate Autoscan activity
NOTES:
1. The USB keyboard hotkeys allow you a faster and broader control for your KVM switching operation in addition to the front-panel button.
If you have configured a hotkey preceding sequence other than two consecutive scroll locks, here you should change your hotkey
sequence accordingly. (For preceding sequence key configuration, please refer to ”Define Hotkey Preceding Sequence” in above table.)
2. When the binding of PC and USB hub port control switching is enabled by the hotkey sequence: ScrLk + ScrLk + Z, any PC and hub port
control switching are bound together. To remove this binding, use the hotkey sequence: ScrLk + ScrLk + X.
3. When the binding of PC and audio and mic switching is enabled by the hotkey sequence: ScrLk + ScrLk + Q, any PC and audio and mic
switching are bound together. To remove this binding, use the hotkey sequence: ScrLk + ScrLk + W.
