724-746-5500 | blackbox.com
Page 2
Category 5e High-Density Feed-Through Patch Panels
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
1. Specifications
Standards:
TIA/EIA 568B.2, Category 5e
Connectors:
JPM806A-HD: (48) shielded RJ-45 on front; (48) shielded RJ-45 on back;
JPM810A-HD: (48) unshielded RJ-45 on front; (48) unshielded RJ-45 on back
Size:
Panel including cable management: 1.75"H (1U) x 19"W x 6"D (4.4 x 48.3 x 15.3 cm)
Weight:
JPM806A-HD: 3.8 lb. (1.7 kg);
JPM810A-HD: 3.3 lb. (1.5 kg)
2. Overview
The Category 5e High-Density Feed-Through Patch Panels meet Category 5e performance requirements and provide patching
without punching down the wires to the ports. These sturdy panels install in relay racks or communications cabinets.
Your package should include the following items. If anything is missing or damaged, please contact Black Box at 724-746-5500.
• (1) Category 5e High-Density Feed-Through Patch Panel
• (4) 10-32 cuphead screws
• (4) 12-24 cuphead screws
• (8) cable ties
• (4) drain wires (with shielded panel [JPM806A-HD] only)
• (8) station ID labels
3. Installation
Use the High-Density Feed-Through Patch Panels in relay racks. They neatly organize and support the data cables you’ve installed
in the rear of the patch panel.
Follow these steps to install the patch panel in a relay rack or communications cabinet:
1. Find an empty rack space.
2. Install the panel with the supplied 10-32 or 12-24 cuphead screws.
3. Install the RJ-45 patch cables on the front and rear connectors. Make sure the rear patch cables are resting on the cable
management bar.
