WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT)
6
3. Installation
1. Make sure that the Wallmount CAT5e Universal Patch Panel is firmly secured to the wall.
2. Remove the IDC cover by sliding it to the right and then lifting it from the surface.
3. To prepare the cable, strip about 2 inches (5.1 cm) of cable jacket. Be careful not to damage the twisted
wire.
4. Place each wire in the appropriate position based on wiring color and label. See Figures 4 and 5.
NOTE
For best performance, keep the untwisted part of the cable less than 0.5 inches
(1.3 cm) long.
Figure 4. 12-port patch panel’s T568B and T568A wiring labels.
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
