724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 5
Page 6
© Copyright 2013. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners
ICI207A, version 1
BLACK BOX
®
Quick Start Guide
Isolated and non-isolated models available.
Industrial Grade 7-Port USB Hubs
ICI207A
ICI208A
Black Box Tech
Support: FREE! Live.
24/7. Tech support
the way it should be.
Great tech support is just 30 seconds
away at 724-746-5500 or blackbox.com.
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
fax 724-746-0746
Mailing address:
Black Box Corporation
1000 Park Drive
Lawrence, PA 15055-1018
Web site: www.blackbox.com
E-mail: [email protected]
Customer
Support
Information
BLACK BOX
®
Industrial Grade 7-Port USB Hub
Table 1. LED indicators.
LED Type
State
Description
USB Power
ON
The hub is running on USB power.
External power is not applied. The hub
can supply up to 100 mA power per
downstream port.
OFF
The hub is either using external power, or
no power is present.
External Power
ON
External power is applied, and an active
host connection exists. The hub will
provide 500 mA per downstream port.
OFF
The hub is bus powered (ICI207A only)or
no power is present (ICI208A).
Port LEDs 1–7
ON
Port is active and ready for use.
OFF
Port has a fault. Power may need to be
cycled.
Troubleshooting
Problem:
The hub is installed, but a downstream
device isn’t working.
Solution:
Some USB devices get their power from the
USB cable. If you are using the ICI207A without an
external power supply, it will only provide 100 mA to
the downstream ports. If your devices need more
power, connect an external power supply to the
ICI207A. It will then provide 500 mA to the
downstream ports.
Problem:
Do I need drivers for the hub?
Solution:
No, the operating system will detect it and
install it automatically.
Problem:
How can I be sure it has been installed?
Solution:
The new hub will be listed in the Device
Manager.
Troubleshooting (Continued from page 5)
Problem:
Can I use USB 1.1 and USB 2.0 devices
together?
Solution:
Yes. USB 2.0 is backwards-compatible with
USB 1.0 and 1.1.
