2 of 2
9/21/2007
#17453
724-746-5500
blackbox.com
FEATURES
• Supports bidirectional synchronous
communication at 64 kbps.
• Point-to-point distance of up to
5250 feet (1600.2 m) on 24 AWG
twisted pair.
• Complies with CCITT/ITU G.823 jitter-
control specifications.
• Includes a power supply.
• Models available for RS-232, V.35,
and X.21 interfaces.
• Includes transformer isolation and
surge protection.
Reach 64-kbps speeds by linking an RS-232 PC to your G.703 network.
OVERVIEW
Connect your V.35, RS-232, or X.21 device to a 64-kbps
G.703 network with these Compact Codirectional G.703
Converters.
Three models are available:
• The IC700A plugs directly into an RS-232 DTE and is
equipped with a male DB25 connector.
• The IC701A plugs directly into a V.35 DTE and features
a male M/34 connector.
• The IC702A plugs into an X.21 DTE and has a male
DB15 connector at the end of a 6-foot (1.8-m) cable.
All versions come with an RJ-45 jack for 120-ohm twisted-
pair network termination.
The converters incorporate local loopback and G.703
loopback diagnostic modes. And for protection against
ground loops and transient surges, the converters have
both transformer isolation and surge protection.
Place your V.35, RS-232, or X.21 device up to 5250 feet
(1600.2 m) away from the G.703 network (using 24 AWG
twisted-pair cable).
The converter conforms to common CCITT jitter-control
standards.
Clocking options are internal, external, or network.
An external power supply is included with the converter.
Compact Codirectional G.703
Converter, RS-232 (V.24)
(IC700A)
➥
➥
RS-232 PC
G.703
Network
TECH SPECS
Speed — 64 kbps
Applications — G.703/64-kbps co-directional PCM network or CSU/DTE
conversion to CCITT/ITU V.24, CCITT ITU V.35, or CCITT/ITU X.21
Compliance — FCC Class A, EN 55022, EN 50082-1, EN60950, CTR 14
Clocking — Internal, external, or network
Line Encoding — AMI
Isolation — 1500 VRMS isolation, transformer coupled
Jitter Performance — CTR 14, G.823
G.703 Interface — Symmetrically balanced pairs, 4 wire, 120 ohms
terminated to RJ-45 female connector
G.703 Input Signal Level — 2.0V differential into 120 ohms, nominal
Maximum Cable Loss — 0 to -10 dB
Device Response Time — 100 ns
Clamp Voltage — 8.5V ±1V
Distance (Maximum) — Up to 5250 ft. (1600.2 m), point-to-point,
on 24 AWG twisted-pair cable
Connectors — IC700A: (1) DB25 male, (1) RJ-45;
IC701A: (1) M/34 male, (1) RJ-45;
IC702A: (1) DB15 male, (1) RJ-45
Indicators — (2) LEDs: (1) TM, (1) SYNC
Temperature Tolerance — 32 to 140°F (0 to 60°C)
Humidity Tolerance — 5 to 95%, noncondensing
Maximum Altitude — Up to 15,000 feet (4572 m)
Power — 115-VAC, 60-Hz external power supply; 115–230-VAC version
available on request
Size — IC700A: 0.7"H x 2"W x 5"D (1.8 x 5.1 x 12.7 cm);
IC701A–IC702A: 0.7"H x 2"W x 3.4"D (1.8 x 5.1 x 8.6 cm)
Item
Code
Compact Codirectional G.703 Converters
RS-232 (V.24), DTE
IC700A
V.35, DTE
IC701A
X.21, DTE
IC702A
You might also need cable…
CAT5 Solid-Conductor Cable
EYN737MS
✦
Compact Codirectional G.703 Converter
✦
(1) 115-VAC, 60-Hz external power supply
✦
A user’s manual
WHAT‘S INCLUDED
