877-877-2269 | blackbox.com
Page 14
IC408A-R2
Chapter 4: Troubleshooting
4. USB Extender Mounting Options
The bottoms of the IC408A-R2 enclosures feature four convenient pre-drilled holes for optional mounting. Based on your
requirements, choose from two available mounting options:
1. USB Extender Mounting Kit (part number IC400MK)
2. USB Extender Direct Surface Mounting (Using your own hardware, stencil provided on the next page)
OPTION 1:
USB Extender Mounting Kit - each kit includes:
• (2) mounting brackets
• (4) (M3.0) locking washers
• (4) (M3.0 x 5-mm) Phillips pan head screws
Mounting Bracket Installation
NOTE: One kit is required to mount a Local Extender or Remote Extender; two kits per system.
Using a Phillips screwdriver, in the order as illustrated below, fasten and secure the provided screws, locking washers and brackets
into place.
Figure 4-1. Installing the mounting brackets.
Once the bracket mounting is secured onto the extender, it is ready for mounting onto a surface.
NOTE: You will need to provide your own screws to secure the extender using the available slots on each bracket.
