1
Black Box Corporation
• 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 •
www.blackbox.com
•
e-mail: [email protected]
© 2004. All rights reserved.
Black Box Corporation.
12/10/2003
#16218
SCSI differential to
single-ended bus
converter.
Extends SCSI bus an
additional 82 ft. (25 m).
Asynchronous and
synchronous
compatible.
SCSI-1, SCSI-2, and
SCSI-3 compatible.
Single-ended to
single-ended SCSI bus
extender.
Does not occupy SCSI
bus ID.
W
ith the SCSI Differential
Converter, you get two great
functions with one product. The
SCSI Differential Converter
translates single-ended SCSI bus
signals into differential signals
and vice versa. And it can be used
as a single-ended to single-ended
bus extender system up to
121 feet (36.9 meters). Just inter-
connect two of the units.
The SCSI Differential
Converter is highly compatible. It’s
a popular choice for high-speed
interconnection media between
micro, mini, and mainframe
computers and high-performance
peripherals. And it’s compatible
with most host adapters and
peripherals that conform to ANSI
X3.131 and X3T9.2 specifications.
Interface the SCSI Differential
Converter with multiple host
computers to provide a high-
speed, extended intercommuni-
BUS
ACTIVE
SCSI Differential Converter
POWER
Get a high-performance converter
and extender in one unit.
Key Features
SCSI DIFFERENTIAL CONVERTER
cations link of standard SCSI bus
interfaces. And remember that
peripherals with high-speed data
throughput usually need a
differential interface to operate
over longer cable lengths. The
SCSI Differential Converter gives
you increased noise immunity,
while maintaining signal integrity
over extended distances.
The SCSI Differential
Converter contains an internal
active bus terminator which
improves cable-matching
characteristics. Remove it for
added flexibility.
Extend the working distance
of high-speed host-to-host
computers, get remote high-
resolution graphics, and store
data. The SCSI Differential
Converter provides ideal solutions
for high-speed remote data
communications.
Installation is easy. It’s
completely transparent to all
SCSI-1, SCSI-2, and SCSI-3
commands and doesn’t require a
SCSI device address. And it can
be installed anywhere on the bus
to provide the bus conversion you
need.
Translates single-ended SCSI bus signals into differential bus signals or
vice versa, or use two units as a single-ended to single-ended bus
extender.
Typical Application
