21
CHAPTER 3: Installation
5. Select “Specify a location” and click “Next.”
6. Type in “X:\Win2k” (where “X” is the drive letter
of your CD-ROM drive)and click “OK.”
7. Confirm that Windows is pointing to X:\Win2k
(where “X” is the drive letter of your CD-ROM
drive). Then click “Next.”
NOTE
Drivers installed from the CD have received “Designed for
Windows 2000” certification. Drivers downloaded from our
Web site or FTP might be pending certification. If so,
Windows 2000 will display a warning: “Digital Signature Not
Found.” Click “Yes” to continue with driver installation. If
you click “No,” you will need to contact Black Box before
continuing to install your USB Director RS-232.
Windows will then finish installing the driver files.
8. Click “Finish” to complete the driver installation.
After installing the drivers, Windows detects your USB
Director RS-232’s new COM ports and will begin to
initialize them. Installation is complete when no more
dialog boxes appear. Your new communication ports,
numbered sequentially following the existing ports in
your system, are now ready.
Summary of Contents for IC1000A
Page 36: ...NOTES...
Page 37: ...NOTES...