16
HIGH SPEED SHM-B ASYNC AND CARD
positioned in front of the rack; this allows for the
easiest access to the terminals, switches, etc.
After a High Speed SHM-B Async Card is wired, it
can then be inserted into an open slot in the SHM-B
rack. Be certain that the circuit board has mated with
the power pins on the SHM-B rack before applying
force to fully seat the board; otherwise you may
damage the board and power pins.
When all boards have been wired and plugged into
the rack, plug the wall transformer into its power
source. You should be able to communicate as
described in
Chapter 4
. When all channels are
operating, attach the SHM-B Rack front panel by first
aligning the plunger latches with their respective
holes in the rack. Press on the top and bottom of the
panel to properly seat it, then firmly press in all six of
the plunger latches to retrain the panel.
