10
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: HOTKEY COMMANDS
A hotkey command is a keyboard sequence used to trigger an action on the KVM Switch through the use of the keyboard
connected on the USB port of the KVM Switch. To activate the hotkey sequence, press the CTRL key twice and then enter the
desired hotkey commands. See Table 5-1.
TABLE 5-1. COMMANDS
COMMANDS
HOTKEYS
RS-232 CONTROL
Switch all devices (KVM, USB 2.0, and Audio)
[CTRL] [CTRL] m [port #] [ENTER]
//m [port #] [ENTER]
Switch KVM only
[CTRL] [CTRL] c [port #] [ENTER]
//c [port #] [ENTER]
Switch Audio only
[CTRL] [CTRL] a [port #] [ENTER]
//a [port #] [ENTER]
Switch USB 2.0 only
CTRL] [CTRL] u [port #] [ENTER]
//u [port #] [ENTER]
EDID Learning
[CTRL] [CTRL] e [ENTER]
//e [ENTER]
Same as front panel Activity button
[CTRL] [CTRL] [up-arrow]
n/a
Same as front panel Activity button
[CTRL] [CTRL] [down-arrow]
n/a
Reset
[CTRL] [CTRL] r
//r
Factory Default Reset
[CTRL] [CTRL] f
//f
