Page 5
GigaTrue CAT6 Component Level Patch Panels
Before you begin to attach the cable support bar to the patch panel, make sure you have made all your after terminations in a
row where the support bar will be mounted. Remove the top left screw and top right screw on the outer most plastic cover. Get
your assembled cable management bar and use the double hooks to clips the bar to the plastic covers on the panel. See Figure 4.
Figure 4. Remove the top screws.
After the cable management bar in attached in place, re-install the two screws to firmly secure the cable management bar to the
panel. Repeat for all other support bars you wish to install.
6. Secure the horizontal cable to the cable management bar. Loosen the single screw and attach the horizontal cable under the
clamp.
7. Finally, connect the patch cord. Plug the patch cord into the patch panel, then connect it to the network equipment.
Installation is complete.
877-877-2269 | blackbox.com
