G.703/G.704 NTU W/V35
8
2. Configuration
The MT335A features configuration capability via hardware DIP switches. This
section describes all possible DIP switch configurations of the MT335A.
2.3 DIP Switch Configuration
The MT335A has two sets of internal DIP switches that allow configuration for a
wide range of applications. The sets of switches are accessed from the underside
of the MT335A. Figure 1 shows the location of the DIP switches on the bottom
of the printed circuit board.
Figure 1.
Underside of MT335A, Showing Location of DIP Switches
The MT335A DIP switches (Switch Sets 1–2) can be configured as either “ON”
or “OFF”. Figure 2 shows the orientation of the DIP switches with respect to
ON/OFF positions.
Figure 2.
Close-up of configuration switches
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
Front
Rear
ON
S2
S1
OFF
